×
Well done. You've clicked the tower. This would actually achieve something if you had logged in first. Use the key for that. The name takes you home. This is where all the applicables sit. And you can't apply any changes to my site unless you are logged in.

Our policy is best summarized as "we don't care about _you_, we care about _them_", no emails, so no forgetting your password. You have no rights. It's like you don't even exist. If you publish material, I reserve the right to remove it, or use it myself.

Don't impersonate. Don't name someone involuntarily. You can lose everything if you cross the line, and no, I won't cancel your automatic payments first, so you'll have to do it the hard way. See how serious this sounds? That's how serious you're meant to take these.

×
Register


Required. 150 characters or fewer. Letters, digits and @/./+/-/_ only.
  • Your password can’t be too similar to your other personal information.
  • Your password must contain at least 8 characters.
  • Your password can’t be a commonly used password.
  • Your password can’t be entirely numeric.
Enter the same password as before, for verification.
Login

Grow A Dic
Define A Word
Make Space
Set Task
Mark Post
Apply Votestyle
Create Votes
(From: saved spaces)
Exclude Votes
Apply Dic
Exclude Dic

Distributed Dissipativity-Based Controller and Topology Co-Design for DC Microgrids

Click here to flash read.

arXiv:2404.18210v2 Announce Type: replace
Abstract: This paper presents a new distributed control approach for the voltage regulation problem in DC microgrids (MGs) comprised of interconnected distributed generators (DGs), distribution lines, and loads. First, we describe the closed-loop DC MG with a distributed controller as a networked system in which the DGs and lines are two subsystems interconnected via a static interconnection matrix. This matrix demonstrates the distributed controller gains as well as the communication topology of DC MG. To design the distributed controller gains, we use the dissipative properties of the subsystems and formulate a global linear matrix inequality (LMI) problem. To support the feasibility of global control design, we propose a local controller for each DG and line subsystem by formulating a local LMI problem. In contrast to existing controllers that segregate communication topology and controller gains, our proposed controller simultaneously designs both communication topology and distributed controllers. The proposed controller is also compositional, meaning that when a new subsystem is added to or removed from networked systems, the controller for the new subsystem is designed solely based on the dynamics of the new subsystem and the dissipativity information of its coupled subsystems. This ensures that the overall system remains stable during plug-and-play (PnP) operation.

Click here to read this post out
ID: 844553; Unique Viewers: 0
Unique Voters: 0
Total Votes: 0
Votes:
Latest Change: May 9, 2024, 7:32 a.m. Changes:
/u/anonymous
Dictionaries:
Words:
Spaces:
Views: 9
CC:
No creative common's license
Comments: